Italmec / Products

Micropartner

Micropartner
chart

MANIPULATOR MICROPARTNER WITH ARTICULATED ARMS

Thanks to the reduced dimensions, the MICROPARTNER MI is a lifting device particularly easy to handle, designed to move in a weightless condition medium-light, center and off-set loads in any direction. Equipped with special gripping tools it allows the operator to work quickly, with precision and without effort, in excellent ergonomic and safety conditions.

Operation

A pneumatic cylinder fed with compressed-air, combined with a transmission lever system, provides balance to the load weight applied. The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced. The operator can change the load level applying a minimum force on the gripping tool or directly on the load.

Technical Specs

Max weight capacity: 125 Kg
Max working radius: 2800 mm
Max vertical lifting speed: 0,5 meters/second
Vertical lift: 1400 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: da +0° a +45° C
Noise level: <70 dB
Consumption: 20 Nl ÷ 100 Nl per working cycle
Rotations:
– constant 360° rotation on the column and tooling axis
– 315° rotation on the intermediate axis

Balancing System

Preselector
It allows a fast presetting of the load balancing effect in case of weight change.

Up/down lever
It allows the lifting and handling of the load in a quick, precise and linear way, without any adjustments, simply actioning a lever control.

Micropartner column mounted

Column mounted
Anchor systems:
* Fixed base-plate
* Portable base-plate for forklift truck transfer
* Portable base-plate for pallet truck transfer
* Portable base-plate for manual transport
* Trolley mounted base-plate for floor tracks.
* Floor built-in track.

Micropartner fixed overhead

Fixed overhead
Anchor flange
The pneumatic manipulator Partner PS overhead version allows to remove any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.

Micropartner running over hread

Fixed overhead
Anchor
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
Attachment
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets.