Italmec / Products

Maxipartner

Maxipartner
chart

MANIPULATOR WITH ARTICULATED ARMS MAXIPARTNER MX

Pneumatic Manipulator MAXIPARTNER MX with articulated arms, equipped with special gripping tools, is suitable to handle heavy (max 900 kg) and also off-set loads, in any direction, allowing the operator to work with the minimum effort in good ergonomic and safety conditions.
Its slim and strong structure eliminates the “drifting” effect.

Operation

A pneumatic cylinder fed with compressed-air, combined with a transmission lever system, provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level simply operating a pneumatic control lever.

Technical Specs

Max weight capacity: 900 Kg
Max working radius: 4500 mm
Max vertical lifting speed: 0,5 meters/second
Vertical lift: 2200 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 100 Nl ÷ 400 Nl per working cycle
Rotations:
– constant 360° on the column and tooling axis
– 300° on the intermediate axis

Balancing System

Up/down lever
It allows the lifting and handling of the load in a quick, precise and linear way, without any adjustments, simply actioning a lever control.

Lever pushbutton
It allows the load balancing by actioning a pneumatic pushbutton after lifting the load through a lever control.

Maxipartner column mounted

Column mounted
Anchor systems:
* Fixed base-plate
* Portable base-plate for forklift truck transfer
* Portable base-plate for pallet truck transfer
* Portable base-plate for manual transport
* Trolley mounted base-plate for floor tracks.
* Floor built-in track.

Maxipartner fixed overhead

Fixed overhead
Anchor flange
The pneumatic manipulator Maxipartner overhead version allows the elimination of any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.

Maxipartner running over hread

Fixed overhead
Anchor
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
Attachment
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets